Click on images to get a closer veiw

ULTRAMAT 6 NDIR ANALYZER

The ULTRAMAT 6 utilizes a highly selective nondispersive infrared (NDIR) dual-beam alternating principle to monitor up to four gases with absorption bands in the infrared spectrum-such as CO, CO2, SO2, NO, NH3, various hydrocarbons and other gases. It offers a new dimension in analytical capability-the result of a combination of highly advanced optics, the cornerstone of which is the Siemens unique optical bench. The optical bench produces an extremely narrow effective absorption curve which dramatically minimizes the influence of components with overlapping absorption spectra-previously a major limiting factor in NDIR analysis. The virtual elimination of cross-interferences allows unparalleled analytical precision that is invaluable for applications with interfering components.

ULTRAMAT 23Cost-Effective NDIR

Multicomponent/Oxygen Analyzer

The economical ULTRAMAT 23 enables continuous measurement of up to three IR absorbing components and oxygen simultaneously. It offers optimum sensitivity and cost savings. Through the use of its AUTOCAL function, the ULTRAMAT 23 carries out calibration of zero and sensitivity, maintenance-free using ambient air. This function is included in the price of the analyzer. ULTRAMAT 23 is utilized in a wide range of applications from monitoring of exhaust gases in industrial plants to monitoring the air in fruit warehouses, greenhouses, fermentation cellars and furnace atmospheres.

OXYMAT 6 Oxygen Analyzer

The OXYMAT 6, which utilizes the paramagnetic alternating pressure procedure to measure oxygen, features the lowest measuring range down to 0.5%. The microflow sensor is always isolated from the sample gas, which allows measurement of even corrosive gases. By incorporating advanced electronics, the OXYMAT 6 allows more stable and repeatable measurements. The menu-driven operation of the OXYMAT 6 makes analytical procedures simple to perform.

ULTRAMAT 6/OXYMAT 6

The combination ULTRAMAT 6 permits you to have two analyzer sections. The NDIR section enables you to measure up to two infrared-absorbent components in a sample gas. By adding a paramagnetic oxygen section you now measure up to two infrared components plus oxygen.

The combination ULTRAMAT/OXYMAT 6    saves space, and is the most cost effective way to measure up to three components in a sample gas. Each analyzer section is independent, and should one fail, the other will continue to operate.

FIDAMAT 5

Measures the total hydrocarbon or non methane hydrocarbon content in the gases. The FIDAMAT F is ideally suited to monitor hydrocarbons over a wide range from 0 to
1 ppm up to 99, 999 ppm. Applications cover chemical processes, environmental emissions and automobile exhaust.

Home | Company Profile | Sales Personnel | Product Lines | Manufacturers | Photo Gallery | Trade Links | Contact Us!

Air Handlers | Analyzers | Boilers | Boiler Room Equipment  | Burners  | Chillers | Chimney Systems & Stacks | Controls  | Cooling Towers | Heat Exchangers  | Hydronic Heating Equipment | Underground Preinsulated Piping Systems | Pressure Transmitters | System Solutions | Home | Official Website | Contact us!